Whirlpool Washer Caps and Lids

Videos!

Your Price

$11.09

Whirlpool Washer Agitator Cap Barrier with Seal

★★★★★

11 Reviews

PartSelect Number PS11748113

Manufacturer Part Number WPW10074580

The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.

Fixes these symptoms

Does not dispense fabric softener or detergent
Leaking
Marks left on clothes
See more...

Installation Instructions

Kevin from Everett, WA

upper portion of 2-piece agitator didn't spin

Popped the agitator cap with a flathead screwdriver. Removed the dust cap, tearing the o-ring in the process. Removed the bolt that holds the agitator in place, removed the whole agitator. Pulled the top portion of the agitator off, removed the dog housing and all pieces of the broken dog pieces. Replaced them, and put it all back together in reverse order. Pretty straight forward repair. Works great! Read more...

Your Price

$22.56

Whirlpool Washer Cap

★★★★★

1 Review

PartSelect Number PS11750408

Manufacturer Part Number WPW10208398

This is a dryer door hinge cap, also known as a bushing, which is a durable plastic cap that is installed on the door hinge and is used to allow your dryer door to operate smoothly when opening and closing. If the door for your dryer is not properly opening and closing, this cap needs to be replaced immediately. To replace this door hinge bushing, you will need a screwdriver to remove and disassemble the door for your dryer. This door hinge bushing is sold individually, but normally wears at the same rate as the others within your dryer door, so order as many as are needed.

Fixes these symptoms

Door won’t close
Lid or door won’t close
See more...

Your Price

$268.34

Whirlpool Washer Lid Assembly

★★★★★

1 Review

PartSelect Number PS12070901

Manufacturer Part Number W11101059

This lid assembly is for washers and covers the washer tub opening. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.

Fixes these symptoms

Lid or door won’t close
See more...

Installation Instructions

Jonathan from HELENA, AL

Replace Cracked Whirlpool Cabrio Washing Machine Lid

This is a very simple repair. My lid was severely cracked on the back left corner where there seems to be a lot of pressure/torque required to shut the lid. There is a metal L-shaped "tab" that inserts into the lid on both sides of the back edge of the lid. The lid is attached to these metal tabs with two screws for each side. My cracked lid had resulted in the lid breaking off of the metal tab with the screws still anchored into the metal tab.

Make sure screws have been removed from the metal tabs on both sides. Do not remove metal tabs- leave them attached to the washing maching (otherwise, you will not be able to attach the lid back onto the machine). Slide the lid over the tabs. There are square-shaped spaces along the edge of the lid where the tabs slide into the lid. Re-screw the screws into the lid, attaching the lid to the tabs through pre-drilled holes on the sides of the lid. It may take a little time to make sure the screws are properly inserted into the lid and tab screw holes. Tighten up and you're finished. Read more...

Videos!

Your Price

$271.92

Whirlpool Washer LID

★★★★★

1 Review

PartSelect Number PS12074659

Manufacturer Part Number W11102314

Fixes these symptoms

Lid or door won’t close
See more...

Your Price

$11.09

Whirlpool Washer Agitator Cap

★★★★★

2 Reviews

PartSelect Number PS11741199

Manufacturer Part Number WP3355758

This is the cap for your agitator.

Fixes these symptoms

Will not agitate
See more...

Installation Instructions

Virginia from Philadelphia, PA

The old lint filter was worn, and would "pop up" so that clothes weren't being moved about during the wash and rinse cycles. If I didn't frequently push it down again, it would fly off during a spin cycle. Dangerous!

I simply lifted the lint filter and its cap off, pressed the new agitator cap onto the new lint filter and put the assemblage into place. No tools needed at all. A $50 dollar repair saved me from replacing my washer/dryer! I'm very pleased. Read more...

Your Price

$7.69

Whirlpool Washer CAP

PartSelect Number PS11775336

Manufacturer Part Number W11050804

Installation Instructions

David from LAKEWOOD, CA

Non agitator pulsating action ceased

Ordered the parts and followed You Tube DYI clip. This 3YOMaytag top loading washer has had a motherboard replaced and now this. It all works fine for now, I cannot imagine what the appliance tech would have charged. Maytag is not what it used to be. Read more...