Frigidaire Washer Dryer Combo Belts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Frigidaire Washer Dryer Combo Belts
Your Price
$14.95
In Stock
Frigidaire Washer Dryer Combo Drum Belt
PartSelect Number PS1148434
Manufacturer Part Number 134503600
This drum belt, often referred to as a drive belt, is used in the assembly of dryers. It goes around the drum, the idler pulley, and the motor pulley. As the armature on the motor spins, this belt is what rotates the drum and tumbles your clothes during the dry cycle. If you can hear the motor running but the drum is not moving, that is a sign your belt is broken, stretched, or damaged, and can no longer grip the drum. This belt is 88 3/4 inches long, and is 1/4 inch wide. Because it is made of rubber it is common for this part to become brittle and need to be replaced. This is an authentic OEM replacement part, and it is sold individually. Remember to unplug your dryer before you begin this repair.
Fixes these symptoms
- Drum Not Spinning
- Marks left on clothes
- Noisy
- See more...
Installation Instructions
Cynthia from Lexington, SC
Squealing noise
We followed the instructions for the drum glide replacement and changed the belt and drum support bearing piece, cleaned it out too. Works like a charm. Thanks for saving us a bundle.
Read more...
75% OFF
Your Price
$13.49
$53.71
In Stock
Frigidaire Washer Dryer Combo Belt
PartSelect Number PS2349294
Manufacturer Part Number 134719300
This dryer belt is one of the most important parts in a dryer and is what allows the dryer drum to spin/rotate. If the dryer belt is damaged or broken, the drum will not spin or will have difficulty in doing so, and your clothes will still be damp after a cycle as a result. This belt is made of durable material and can wear down over time and extended use of the dryer. Replacing a dryer belt will require some disassembly of your dryer, so a screwdriver and wrench will be needed to access and replace it. This belt is an individual OEM part.
Fixes these symptoms
- Drum Not Spinning
- Noisy
- See more...
Installation Instructions
Philip from Oakland, CA
Noisy Dryer
When I described the noise to a YouTube appliance diagnostician, I was directed to check the felt seals front and back of the rotating drum for wear, tears, or foreign objects. As it happens the felt seals looked find and there were foreign objects so, not wanting to disassemble and reassemble the dryer more than I had, I ended up replacing all the replaceable moving parts that I considered possible culprits: The idler tension spring, the idler tension bracket (which includes a nylon pulley wheel), the drum belt, the five rubber-tipped bearings that support the drum and keep it in place, and the foam seal on the blower housing which seemed a little brittle and old, as well as high-temperature adhesive for the latter. The instructional videos here and on YouTube were extremely helpful (I doubt that I would have attempted this job at all, had I not watched these ahead of time). The most time-consuming aspect was waiting for the arrival of the parts as I didn't order them all at the same time or all from the same place (I ordered from whomever could ship me a given part the fastest. Disassembly took less than an hour. Re-assembly with the new parts in place took about the same but was a little more awkward because this appliance sits in a very narrow closet and it's difficult to ensure that the 4" flexible duct stays in place when sliding the appliance back into the closet. No regrets. Now I know the basics if this dryer needs attention in future and I also know all the parts that I can eliminate as suspects in any future maintenance (the parts that I replaced)
Read more...
Your Price
$12.95
In Stock
Frigidaire Washer Dryer Combo Multi-rib Drum Belt
PartSelect Number PS3408299
Manufacturer Part Number 137292700
The multi-rib drum belt is also known as a drive belt and is a part for your dryer. The function of the drum belt is to attach to the motor pulley. It will then spin the drum as the motor rotates. Over time this part will naturally dry out. If your drum belt begins to crack or break, the dryer will not be able to continue to turn. If your dryer is running but your belt will not rotate, that likely means that it has been damaged and needs replacing. The tools you will need for this repair are a putty knife and a screwdriver set.
Fixes these symptoms
- Drum Not Spinning
- Noisy
- See more...
Installation Instructions
Steve from Wheelersburg, OH
squeeking like crazy
well, i started at the top and worked my way down. by taking the top off, it gave me more room to get the dryer tub out. took the two screw`s out of the vented plate on the back of the machine to undo the belt. this is a stackable washer-dryer combo, so next i took off the white plate on front between washer & dryer. took off the control panel, unpluged it, then took dryer door front off. then removed the two screw`s that hold that bracket on ,in the back of dryer, pulled the drum out & replaced the belt, but before replacing anything i took the shopvac to it , there was alot of lint in there.when replacing the Grounding Ball Clip & Grounding Ball, i took a one inch by two inch magnet and used it to hold the Grounding Ball & Clip in place so i could get the two screws started in the Drum Support Bearing & Bearing Bracket. after installing that i put the shaft in place & lined the dryer tub up with the 3 screw hole`s ,and boom, bang, pow...nothing to it. it`s easy...parts came very fast....Thx PartsSelect.com...i`ve told all my friend`s about PartsSelect
Read more...
Your Price
$20.95
In Stock
Frigidaire Washer Dryer Combo Drive V-belt
PartSelect Number PS1146950
Manufacturer Part Number 134511600
This rubber V-style drive belt slips on the motor pulley to bring the basket to the required speed. If you notice a burning rubber smell or grinding noises coming from your washer, your washer does not start, drain, spin properly (will not spin/spins slowly/will not agitate properly), or if your washer shakes or moves during the cycle; check your drive belt for signs of wear and tear. Replace the drive belt if you notice that the belt looks damaged. This OEM part is approximately 35 inches in length, and sold individually.
Fixes these symptoms
- Burning smell
- Noisy
- Spinning Issues
- See more...
Installation Instructions
rodney from fairfield bay, AR
replace broken drive belt
carefully pry up on front washer top to release plastic keeper pins,remove 2 phillips screws from beneath lower front washer panel,slightly lift upward on panel to release.remove old broken belt,push new belt beneath large tub pulley,put belt on small motor pulley,push back belt tension /idler arm,start belt on large tub pulley,turn tub pulley by hand to run belt on,release tension on idler arm.replace front panel and lower top.WALAAH!!!! you are done.
Read more...
Your Price
$21.95
In Stock
Frigidaire Washer Dryer Combo Drive Belt
PartSelect Number PS419285
Manufacturer Part Number 134051000
This is a drive belt for your washing machine. This part spins the basket in your appliance by connecting the drive motor to the drive system. You will need to replace the drive belt if your pumps are not spinning, your washer is not agitating, or you are noticing excess noise and/or a burning smell. This belt is black with six ribbings. To replace this part, you will need a Phillips screwdriver.
Fixes these symptoms
- Burning smell
- Spinning Issues
- Spins slowly
- See more...
Installation Instructions
Carmen from Foreston, MN
motor burned out, tub quit going around
First I turned off the water and disconnected the hoses. I took off the back panel and unscrewed the 4 bolts holding the motor in place. The grounding screw was impossible to remove, so I had to cut the wire off. Took out motor and disconnected the electrical connector. Put new motor in (ordered new belt, figuring it would need replacing - was still in excellent shape, but replaced it anyway), bolted in the motor (socket set works best on further away bolts, screwdriver for closer ones). Put the belt on the motor first and then pulled it up over the side of the tub and turned the tub to get it around the whole tub - took alittle bit of turning to get it on. Plugged in electrical connector and screwed grounding wire into hole. Replaced back panel and water hoses. Got a bit dirty and sweaty but not too hard to do it yourself, as I am a 48 yr woman and don't usually do this kind of thing.
Read more...
Your Price
$44.95
In Stock
Your Price
$54.40
In Stock
Frigidaire Washer Dryer Combo Belt
PartSelect Number PS12364058
Manufacturer Part Number 134616701
This product is a genuine OEM BELT,DRIVE,POLY-V from the esteemed brand, Frigidaire. It subtlety connects the drive motor to the drive system in a washer, enabling the basket to spin efficiently. Designed with precision, it fits particularly in some models of Frigidaire, Electrolux, White Westinghouse, and Tappan with minute variabilities in size and shape. Before installing this integral part, ensure your washer is unplugged to avoid mishaps, and wear work gloves for adequate hand protection. Simply remember to confirm your part number aligns with your model for a smooth and flawless operation when ordering from our website. Trust in the reliability of Frigidaire's genuine parts for your appliance repairs.
Installation Instructions
Joseph F from UNIVERSITY PL, WA
Washer would squeak and buck on spin
Ruemove the back panel with a square drive bit. Belt removal was easy: rotate the large whelk while coaxing the belt off with hand pressure from behind. Comparing the old to new belts, the circumference difference was about 2”. Loop the new belt over the small motor wheel and start looping over the big drum wheel; it will be reluctant. Place a small smooth pry bar between the belt and wheel while rotating the big wheel using the bar to keep the belt on the wheel. Then turn the big wheel by hand a few times to assure the belt rides correctly.
Read more...
Your Price
$46.95
In Stock
Your Price
$55.95
Special Order
Frigidaire Washer Dryer Combo Dryer Drum Belt
PartSelect Number PS454127
Manufacturer Part Number 5303161099
This belt is flat with 3 ridges and length of 78.50” and width 1/4”.
Your Price
$107.86
Special Order
Frigidaire Washer Dryer Combo Belt
PartSelect Number PS979484
Manufacturer Part Number 5304439725
This flat style ridgeless dryer belt is manufactured for Frigidaire/WCI brand clothes dryers. This belt is 88 inches in length and is half an inch wide.
Related Frigidaire Washer Dryer Combo Parts
- All Frigidaire Washer Dryer Combo parts
- Frigidaire Washer Dryer Combo Bearings
- Frigidaire Washer Dryer Combo Brackets and Flanges
- Frigidaire Washer Dryer Combo Caps and Lids
- Frigidaire Washer Dryer Combo Circuit Boards and Touch Pads
- Frigidaire Washer Dryer Combo Dispensers
- Frigidaire Washer Dryer Combo Doors
- Frigidaire Washer Dryer Combo Drums and Tubs
- Frigidaire Washer Dryer Combo Ducts and Vents
- Frigidaire Washer Dryer Combo Elements and Burners
- Frigidaire Washer Dryer Combo Fuses
- Frigidaire Washer Dryer Combo Hardware
- Frigidaire Washer Dryer Combo Hinges
- Frigidaire Washer Dryer Combo Hoses and Tubes
- Frigidaire Washer Dryer Combo Knobs
- Frigidaire Washer Dryer Combo Latches
- Frigidaire Washer Dryer Combo Motors
- Frigidaire Washer Dryer Combo Panels
- Frigidaire Washer Dryer Combo Pulleys
- Frigidaire Washer Dryer Combo Seals and Gaskets
- Frigidaire Washer Dryer Combo Springs and Shock Absorbers
- Frigidaire Washer Dryer Combo Switches
- Frigidaire Washer Dryer Combo Valves
- Frigidaire Washer Dryer Combo Wheels and Rollers
- Frigidaire Washer Dryer Combo Wire Plugs and Connectors