Frigidaire Washer Dryer Combo Hardware
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Frigidaire Washer Dryer Combo Hardware
49% OFF
Your Price
$19.99
$39.31
In Stock
Frigidaire Washer Dryer Combo Clamp
PartSelect Number PS2349238
Manufacturer Part Number 134616300
This genuine OEM Frigidaire Bellows Spring Clamp provides secure placement for your washing machine's door boot, ensuring a tight, leak-free seal during operations. Compatible with select Frigidaire, Electrolux, White Westinghouse, and Tappan washers, it's precision-crafted for accuracy in fitting, despite possible minor variations in size or shape among similar parts. Please ensure your model aligns with this part before ordering. For safety, unplug your washer and wear protective gloves during installation as this part is spring-held. Enhance the longevity of your washing machine with this essential, authentic Frigidaire component. Valuing your washer's efficiency and performance starts with choosing the right parts.
Fixes these symptoms
- Leaking
- See more...
Your Price
$21.95
In Stock
Frigidaire Washer Dryer Combo Screw
Removed belt from motor
Needed to lift up top of dryer
Inserted flathead screwdirver in front under top to push in two metal clips holding top down
Lifted up top of dryer
Removed 2 screws holding on front of dryer
Removed front of dryer
Broke Door Switch removing front of dryer. I should have depressed the metal sides in and pulled switch through hole.
Instead, I tried to remove the leads. This broke the fragile prongs.
Started dryer (with belt removed so drum doesn't spin)
Verified ignightor came on every heating cycle
Gas turned on properly
Gas turned off after 90 seconds
Gas never came back on
Indicitive of bad coils
New coils solved the problem
Replaced door switch and lint trap cover in the process. Read more...
PartSelect Number PS417463
Manufacturer Part Number 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Installation Instructions
Edward from Baltimore, MD
Drying too slowly
Removed access plate from back bottom leftRemoved belt from motor
Needed to lift up top of dryer
Inserted flathead screwdirver in front under top to push in two metal clips holding top down
Lifted up top of dryer
Removed 2 screws holding on front of dryer
Removed front of dryer
Broke Door Switch removing front of dryer. I should have depressed the metal sides in and pulled switch through hole.
Instead, I tried to remove the leads. This broke the fragile prongs.
Started dryer (with belt removed so drum doesn't spin)
Verified ignightor came on every heating cycle
Gas turned on properly
Gas turned off after 90 seconds
Gas never came back on
Indicitive of bad coils
New coils solved the problem
Replaced door switch and lint trap cover in the process. Read more...
Your Price
$20.95
In Stock
Frigidaire Washer Dryer Combo Single Shock Mounting Pin
removed the back panel.
unscrewed the contol board that blocked access to the bottom of the shock absorber.
pulled the original pins out with pliers while pressing in the piece that prevents it from working its way out.
removed the shock absorber.
placed the new shock absorber in the bottom mount, put soap on the pin for lubrication and pushed it through the hole. Put the top of the shock absorber in its place and placed the other pin in.
replaced the control board and replaced the rear panel. Read more...
PartSelect Number PS417323
Manufacturer Part Number 131268300
Installation Instructions
Richard from Quincy, MA
originall shock was broken
disconnected the power and water supply.removed the back panel.
unscrewed the contol board that blocked access to the bottom of the shock absorber.
pulled the original pins out with pliers while pressing in the piece that prevents it from working its way out.
removed the shock absorber.
placed the new shock absorber in the bottom mount, put soap on the pin for lubrication and pushed it through the hole. Put the top of the shock absorber in its place and placed the other pin in.
replaced the control board and replaced the rear panel. Read more...
Your Price
$23.95
In Stock
Frigidaire Washer Dryer Combo Screw (m50.8 X 14.5)
PartSelect Number PS11766100
Manufacturer Part Number 5304505259
Sold individually.
Your Price
$22.95
In Stock
Frigidaire Washer Dryer Combo Screw
PartSelect Number PS417085
Manufacturer Part Number 131168200
Sold individually.
Installation Instructions
Glenn from Fort Worth, TX
Dryer squealed loudly
First, I removed the top panel which is held on at the front by pressure clips. Second, I removed the entire front panel which entailed removing 2 screws and 2 wire couplings. Third, I removed the 3 screws on the inside center of the drum which turned out to be unnecessary. Fourth, I slid the drum forward in order to access the rear bearing. Lastly, I replaced the entire bearing assembly including the shaft, bracket, bearing, grounding ball and clip. Again, probably not needed but I had ordered the parts in advance in preparation for the worst.
Read more...
Your Price
$17.95
In Stock
Frigidaire Washer Dryer Combo Screw
PartSelect Number PS2331296
Manufacturer Part Number 216858001
Sold Individually.
Installation Instructions
Terrence from WESLACO, TX
Your Price
$26.95
In Stock
Frigidaire Washer Dryer Combo Motor Clamp
PartSelect Number PS815563
Manufacturer Part Number 134242400
Fixes these symptoms
- Noisy
- See more...
Your Price
$18.95
On Order
Your Price
$18.95
In Stock
Frigidaire Washer Dryer Combo Steel Washer
quick delivery and easy repair ... like new again .
would use you again Read more...
PartSelect Number PS436497
Manufacturer Part Number 316008401
This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter inch inner diameter. This washer is an OEM part, made of steel, which is sourced directly from the manufacturer. This specific steel washer is used with your range, to secure the inner and outer door together and to secure the oven door handle back in place. Users have ranked this repair as a simple installation that should take you less than fifteen minutes to complete.
Installation Instructions
KELLY from LAKELAND, FL
Handle on oven door broke
called around and way to much money for repair man as well as parts from local appliance repair store. They wanted 10.00 for a screw that we got from you for $3.00 same as all the other parts saved over 70.00 dollars.quick delivery and easy repair ... like new again .
would use you again Read more...
Your Price
$17.95
In Stock
Related Frigidaire Washer Dryer Combo Parts
- All Frigidaire Washer Dryer Combo parts
- Frigidaire Washer Dryer Combo Bearings
- Frigidaire Washer Dryer Combo Belts
- Frigidaire Washer Dryer Combo Brackets and Flanges
- Frigidaire Washer Dryer Combo Caps and Lids
- Frigidaire Washer Dryer Combo Circuit Boards and Touch Pads
- Frigidaire Washer Dryer Combo Dispensers
- Frigidaire Washer Dryer Combo Doors
- Frigidaire Washer Dryer Combo Drums and Tubs
- Frigidaire Washer Dryer Combo Ducts and Vents
- Frigidaire Washer Dryer Combo Elements and Burners
- Frigidaire Washer Dryer Combo Fuses
- Frigidaire Washer Dryer Combo Hinges
- Frigidaire Washer Dryer Combo Hoses and Tubes
- Frigidaire Washer Dryer Combo Knobs
- Frigidaire Washer Dryer Combo Latches
- Frigidaire Washer Dryer Combo Motors
- Frigidaire Washer Dryer Combo Panels
- Frigidaire Washer Dryer Combo Pulleys
- Frigidaire Washer Dryer Combo Seals and Gaskets
- Frigidaire Washer Dryer Combo Springs and Shock Absorbers
- Frigidaire Washer Dryer Combo Switches
- Frigidaire Washer Dryer Combo Valves
- Frigidaire Washer Dryer Combo Wheels and Rollers
- Frigidaire Washer Dryer Combo Wire Plugs and Connectors