66213282K112 Dishwasher - Instructions

The most difficult part was taking the old, snap-together, parts off. The new parts were easy and quick to install.

I ordered this thinking I would probably need more parts, but was unsure which ones. When the part arrived I immediately noticed that it was not identical to the original part, but looked like it may work. I also received an instruction book that I did not expect. The first side probably took 15 or more minutes. The second side was installed in just a couple minutes. The toughest part was removing the old pieces.

Nomenclature of parts were not named with a drawing, Photos of instructions were very dark and unable to ascertain which was which , they were worthless. It took me 20 minutes to figure out where the new parts belonged. Keep in mind the new parts were different than the old parts. A simple sketch would have helped a lot.

The parts seemed more sturdy than the originals that broke, so I hope this will be a better design. The instructions were adequate for installation and the adapter for the screws was supplied with the parts. The most difficult part was removing the old broken rack adjusters since there was no instruction for that.

To remove the old parts off the top rack I used a jack knife & a needle nosed plier. The pictures were small in the instructions especially where it showed the small backing plate that held the part that slides up & down. I installed it wrong but I could easily remove it once I pushed in the the tab with a knife blade & then installed it correctly. The updated metal wheels are a big improvement & it works fine now. Huge savings because I did it myself, anyone can do it if you're not in a hurry.

the delivery time was terrific for the first thing. I placed all the parts out on the table and the instructions were very direct and simple to follow. it took more time to figure out the removal of the old plastic parts, but was very easy after you find where to place the screw driver to open the side cover and let the old adjuster fall apart. The new parts went in as directed by the directions, and pictures, very simply and it only takes a few minutes to complete and reinstall the top rack in the dishwasher. I was very pleased with all of the service.

Basically I just had to look at the instructions that came with replacement kit and follow the directions as shown.The included pictures for the kit were not very clear. Poor quality ! That being said, this install went very smooth, The directions were easy to understand and I had this dishwasher back up and running in no time. It was a pleasure to actually get this unit fixed so quickly. Thank You !!

bought the adjuster kit and the hardest part was taking off the old pieces. the new pieces went on very easily and smoothly. I am a female that has done a lot of house projects and this was not difficult at all.

First of all, the initial manufacture of the shelf rack rollers was substandard, and I replaced the left side less than a year ago, and both left and right side failed (rollers came off, causing shelf to drop down....not good!) When I "reordered' the parts the second time, I was pleased to see a "kit" was sent to replace "both" sides! Smart! I needed no tools, replaced the right side in 15 minutes, and the left side in 3 minutes. Much better than original parts! Thanks guys!!

It was so easy! Broke of the already broken supports and followed the easy step by step instructions with pictures.

Followed the written instructions provided with the new adjuster replacement kit. No problems with the removal and replacement of the adjusters.

tried to follow the instruction that came with the parts, to no avail? it would have been better to send a note that said good luck. the only part that helped was the part that said remove the old parts. after that is was just a fit and test, fit and test, fit and test, only because of my expert analytical abilities was i able to fit it all together. please draw up better instructions. it fits good and works well.

The enclosed instructions were black and white, faded, with pictures subsequently fuzzy and difficult to analyze. The experienced DIYer will figure this one out with or without the instructions, but the less experienced DIYer may well struggle a bit here. There are two sides to be repaired. The first side took me 15 minutes to slowly puzzle out, the second side was less than 5 minutes once I grasped how all the pieces fit together.

I removed the old worn parts completely and then, following the instructions and trying to look at the pictures which were very dark and not able to be seen very well, I put the new parts on and replaced the rack in the dishwasher. The repair was fairly simple but would have been easier if the pictures on the instructions had been better.

Took a bit of interpretation to figure out how the piece fit together. Not same as the original. Once i decoded the system, the second side took less than 10 minutes. Fits and works fine.