Laminate Trimmer Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Laminate Trimmer Parts
Your Price
$6.50
In Stock
Laminate Trimmer Ball Bearing
PartSelect Number PS10180918
Manufacturer Part Number 605040-65
This Ball Bearing is sealed on both sides. It is a genuine DeWalt replacement part and is sold individually. • Ball bearings are used to reduce friction between rotating parts.. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Your Price
$18.87
In Stock
Laminate Trimmer Carbon Brush Set
PartSelect Number PS10156657
Manufacturer Part Number CB408
This #191938-1 (CB-408) Makita carbon brush set contains two individual carbon brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. This brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Your Price
$17.42
In Stock
Laminate Trimmer Brush Pair
PartSelect Number PS10189222
Manufacturer Part Number N381708
This is an authentic DeWalt replacement part that has been sourced from the original manufacturer to be used laminate trimmers. The brushes fit into the motor housing. The brushes are used to relay electricity from the switch to the motor's armature assembly. The brushes are sold as a pair.
Your Price
$18.87
In Stock
Your Price
$6.40
In Stock
Laminate Trimmer Flat Washer 5
PartSelect Number PS10155891
Manufacturer Part Number 941101-4
This item is a genuine Makita part that has been sourced from the original manufacturer to be used with trimmers, circular saws, sanders, routers, nailers, reciprocating saws, laminate trimmers, and planers. The flat washer is used with different types of power tools and the application of the washer can vary based on the model of the equipment. This item is available as an individual replacement part.
Your Price
$14.74
In Stock
Laminate Trimmer Sub-base
PartSelect Number PS10189234
Manufacturer Part Number N381728
This part is available as an individual replacement. The sub-base is made of plastic and attaches to the base. When replacing this part a screwdriver may be needed. It will require replacing if it becomes cracked or broken. This item is an original part from DeWALT for use in laminate trimmers.
Your Price
$32.73
In Stock
Laminate Trimmer Switch
PartSelect Number PS10153621
Manufacturer Part Number 651423-1
This item has been sourced from the original manufacturer and is intended to be used with routers, drywall cut out tools, laminate trimmers, demolition tools, and multi-tools from Makita. The switch is used to relay electricity from the power cord to the tool's motor. This item is sold as an individual replacement part.
Your Price
$91.86
On Order
Laminate Trimmer Base Assembly
PartSelect Number PS10189212
Manufacturer Part Number N381528
This is an authentic DeWalt replacement part that has been sourced from the original manufacturer to be used with laminate trimmers. The base is a complete replacement part that is pre-assembled. This item is used to link the sub-base and the motor housing. This item is priced as a single item.
Your Price
$6.40
In Stock
Laminate Trimmer Insulation Washer
PartSelect Number PS10153885
Manufacturer Part Number 681614-0
This genuine manufacturer-sourced part is specially designed for Makita power tools. It is an important component which provides a tight seal between connected components. Unfortunately, over time it will wear out and it may begin to crack eventually requiring a replacement. To ensure the correct repair procedure, refer to the appropriate diagrams for your model. Note, this high-quality insulation washer is made of durable material and is sold as an individual item. A screwdriver will be needed to take apart and reassemble the tool when performing this repair.
Your Price
$6.65
In Stock
Laminate Trimmer Wrench 17
PartSelect Number PS10154182
Manufacturer Part Number 781008-0
This is a genuine OEM sourced part which is specially designed for use with Makita equipment. It is an identical replacement for a missing or faulty wrench that was originally included with a new unit. Please make sure to refer to the owners manual for the correct location and application of this item. Keep in mind this high-quality wrench is made of durable metal and is sold individually.
Laminate Trimmer Brands
- DeWALT Laminate Trimmer Parts
- DeWALT Laminate Trimmer Parts
- Makita Laminate Trimmer Parts
- Makita Laminate Trimmer Parts
- Porter Cable Laminate Trimmer Parts
- Porter Cable Laminate Trimmer Parts
Related Laminate Trimmer Parts
- Laminate Trimmer Bearings
- Laminate Trimmer Hardware
- Laminate Trimmer Caps and Lids
- Laminate Trimmer Manuals and Literature
Popular Laminate Trimmer Models
Below are the most popular Laminate Trimmer models we have. Enter your model number in the search box to find your model.
- 313 Porter Cable 313 Parts
- 7301 (Type 2) Laminate Trimmer
- 7301 (Type 1) Laminate Trimmer
- 7301 (Type 3) Laminate Trimmer
- 410 (Type 1) Underscribe Laminate Trimmer
- 310 (Type 4) Laminate Trimmer
- 310 (Type 1) Laminate Trimmer
- 310 (Type 2) Laminate Trimmer
- 310 (Type 3) Laminate Trimmer
- 309 (Type 2) Laminate Trimmer
- 309 (Type 1) Laminate Trimmer
- 3709 Tilt Base 1/4" Laminate Trimmer with L.E.D. Light
- 3700B Trimmer
- DWE6000 (Type 1) Laminate Trimmer
- 3102 (Type 2) Laminate Trimmer Motor
- 3102 (Type 4) Laminate Trimmer Motor
- 3102 (Type 3) Laminate Trimmer Motor
- 3102 (Type 1) Laminate Trimmer Motor
- 3706 Drywall Cut-Out Tool
- 3707FC Fixed Base Laminate Trimmer