Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jesse S - June 4, 2019
Verified Purchase
Great Transaction
Easy to order the part online. Received quickly and worked perfect!!
★★★★★
★★★★★
John M - March 12, 2019
Verified Purchase
jENNAIR Large burner
Snap off, snap on. works perfect.
★★★★★
★★★★★
Chauncwey M - November 2, 2018
Verified Purchase
good
good
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 8 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Igniter clicked but burner would not light
Once I got over my first time jitters this was easy. Lucky for me the old screws went back in just fine. The recommended 8/18 x 3/8 screws were way to small to be usable. Check the length of your existing screws if you can before purchasing the recommended ones.
Wanted to deep clean the range, but popped the worn screw heads on both the burner mounts and igniters embedded in the chassis. The way the range is designed, the bolts extend through the glass top and into the burner orifice. The bolts were unable to be extracted so replacement was the only option outside of a small third party machine s
... Read morehop. The double burner is discontinued and impossible to find, will replace this "High-End" POS when we remodel.
Removed Burner Heads Disconnected igniter Leads Extended range to remove glass top Removed glass top mounting screws CAREFULLY Removed Glass Top (REPLACEMENT = $800 Min) Removed affected burner orifices Tracked down parts list and maintenance manuals Tracked down similar issue: https://www.youtube.com/watch?v=YfCLJ1rXK6w&t=114s Replacement bolts : #8 24 X 0.5" Sheet Metal Screws Ordered Replacement parts and installed in reverse
I had the front right burner and back left burner always click, but never light without help from a match or lighter. So I saw how you can use rubbing alcohol to clean the ignitors with a Q-Tip. I did that, but the ceramic on the back left ignitor broke off with just a gentle cleaning. I ordered a replacement ignitor which came quickly. W
... Read morehile waiting I had to try to get off the burner, as the Torx (star) screws were both not budging even with a little WD40. I ended up drilling both screws out. When the ignitor came I replaced it quite easily. However, all five burners started clicking and kept on clicking once I plugged the cooktop back in. Problem number two - the Spark Module or wiring had a problem. It was the Spark Module and I'll describe that repair with the next installation s=instruction I fill out.
Removed two screw securing wburner and disengage igniter.
Juan J, from UNIVERSAL CTY, TX
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the gas burner head needed to be rerplaced due to the sparker not functioning properly
Ordered a replacement, removed the old burner and installed the new one. Works perfectly.
John L from FAIR OAKS, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Electrode not igniting burner
I've done this once before on this same gas stovetop as the electrode can degrade if it suffers from too many "boil-overs". The most important thing to do if the 2 screws holding the burner head on the cooktop are "tight" and don't unscrew easily is to soak them with WD-40 to loosen them up. Don't be in a hurry. They may need a couple o
... Read moref soak and waits. Once the screws are out, it's just a matter of connecting the wire on the electrode and replacing the burner. Also a Star screwdriver that fits properly is essential.
Read less
Thomas from Cary, NC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
8 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
electrode would not lite burner
Unscrewed burner head and replaced with new burnerhead and electrode. Just like new. Parts cost 128.00 including shipping. Very simple repair. Saved 200.00 in labor. Parts came within 36 hours. Super Fast.
The igniiter is made of ceramic and had cracked. I remove the burner assembly, but couldn't remove the screw holding the igniter. After trying liquid wrench and every available screw driver. I opted to order the complete burner assembly. I installed the new assembly in 5 minutes and it worked great. This is the second ceramic ig
... Read moreniter that has cracked on this stove top and both times I've had to replace the whole assembly. For a $1000 stovetop, I expected better quality. I'm just wondering how many times I'm going to have to replace burner assemblies. Each time it's been a different assembly.
Read less
Sidney from Saint Francisville, LA
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
9 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
10 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Phil
November 29, 2018
Is this burner head 4.25” in diameter?
For model number JGD3536WSO1
Hi Phil,
Thank you for your question. The diameter of this large burner head is approximately 3 1/2 inches. I hope this helps. Thank you and have a great day!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Larry
November 14, 2018
All of the screws in the burner heads have seized in the assembly. I have soaked them for days without success, any suggestions?
For model number JGD8430ADB
Hello Larry, Thank you for the question. Most times in this case, they will need to be drilled out. Thank you for your inquiry, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
David
November 22, 2017
Does this part replace the medium burner and include the electrode?
For model number JGCP648ADP
Hi David,
Thank you for your inquiry. The burner head does not include the electrode. The part number for the electrode is PS11744318. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Bryan
February 19, 2018
Is it possible to change one the smaller burners to a larger size ?
For model number JGD8430ADS
Hi Bryan, Thank you for the question. We can only recommend using the size burners that came with the appliance. Hope this helps!
Was this helpful?
Thank you for voting!
Prema
July 4, 2019
The screws were rusted and the tops broke off, so i have to now drill the screw out, i guess. However the ignitor fell into the hole completely, so how do i replace it now?
Hi Prema, thank you for your question. You are going to have to open up the appliance and put the part back into place. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Adam
January 7, 2020
This model has the screws that hold the burner tops in place, do you really need the screws if the heads break off but there is still s stub there that holds it in place?
For model number JGC8430BDS
Hello Adam, Thank you for the question. As long as the head is still secure and not lose, you should be fine. We hope this helps!
Was this helpful?
Thank you for voting!
Adam
January 7, 2020
Are all the ignitors supposed to spark when you lite just one burner?
For model number JGC8430BDS
Hello Adam, Thank you for the question. It is a typical for the gas stoves to spark all of the burners even when only one is needed. We hope this helps!
Was this helpful?
Thank you for voting!
Shawna
February 1, 2020
Need the replacement burner base for the burner # 3 btu 10000
For model number KCGD506GSS
Hello and thank you for writing.
Burner head # PS12070537 is in the list of compatible parts for your model. We hope this helps. Please contact us anytime if you require further assistance.
Hi, Question: igniters continue to fire after flame is present.
For model number JGC8536ADS
Hello Brian, Thank you for the question. If all burners are clicking, we suggest cleaning around the igniters to make sure there is no moisture or food debris. If they are clear make sure the burner caps are centered. If the clicking continues, you may have a defective Spark Module. This part sends enough current to the igniter to create a spark to the bottom of the burner cap. We hope this helps!
This burner description says it comes with the igniter. The 360 degree picture shows it with the electrode that I assume is PS1173318. Another answer says it does not come with the electrode, and the price reflects that, but I just want to be positive before I order both.
Also, does it come with the screws? I'm guessing I should order those as well. My current ones are a bit rusty and I suspect I'll mess them up just getting them out.
Thank you very much! I'm looking forward to not having to use a lighter and cross my fingers to light that burner.
For model number JGD3430WB00
Hello Peg, thank you for reaching out. According to our research, the surface burner base you mentioned comes with the spark igniter. The screw that holds the burner base is part number PS11746840, and it is sold individually. The screw does not come with the surface burner base. We hope that helps!
