This white drum glide is used in a clothes dryer to ensure the front of the dryer drum is supported as it does rotations. *Please note: these are sold individually, however there are two of these in your appliance. We recommend that these be replaced at the same time, this allows for optimal performance and ensures they wear evenly. Each drum glide is approximately 33 inches in length. If the following symptoms occur, consider replacing the drum guide as a solution: dryer is noisy, will not tumble, or leaves marks on clothes. Remember to unplug the power source to the dryer before installing this part. Refer to the diagram provided by the manufacturer for further instructions and guidance.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Dryer Drum Glide - White
Troubleshooting
This part fixes the following symptoms:
Noisy | Marks left on clothes
This part works with the following products:
Dryer, Washer Dryer Combo.
Part# 137513300 replaces these:
AP5650542, 2629362, 137513300, 131963900
Customer Reviews
Average Rating:
★★★★★
★★★★★
15 Reviews
3.7
Filter By Rating:
5 Stars
8
4 Stars
2
3 Stars
1
2 Stars
1
1 Star
3
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Harold D - March 27, 2020
Verified Purchase
Easy Fix
Fit great in drum
★★★★★
★★★★★
Jason H - October 1, 2019
Verified Purchase
Fits great
Worked great and fit just right.
★★★★★
★★★★★
George O - September 20, 2019
Verified Purchase
Easy repair. Watched video and followed instructions
Easy repair. Watched video and followed instructions. Requires 2 pieces so when ordering order quantity 2 drum glides as each half is sold separately. Helpline person was very nice and helpful.
★★★★★
★★★★★
Kelly L - August 21, 2019
Verified Purchase
Exactly what I needed
This is exactly what I needed and my screeching dryer is back to it's reliable, quiet, old self.
★★★★★
★★★★★
Andi K - May 23, 2019
Verified Purchase
Easy to replace
Quick, easy and inexpensive solution to repair dryer
★★★★★
★★★★★
Margarita M - April 10, 2019
Verified Purchase
Easy Repair
Iran arrived promptly and as described. No problems with installation. My dryer worked perfectly afterwards.
★★★★★
★★★★★
Martin S - April 10, 2019
Verified Purchase
still waiting!
The part was ordered on March 15th and STILL has not arrived. Hoping no more cloths get ruined!
April 10, 2019
Hello,
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!
★★★★★
★★★★★
Tenille C - November 26, 2018
Verified Purchase
Worked as expected
Balanced the drum and allowed for proper rotation
★★★★★
★★★★★
Amy P - November 13, 2018
Verified Purchase
Easy repair
The parts came fast and only took a few minutes for an inexperienced person (me) to fix correctly. Sadly the bearings and fan thingy are also busted which are over our budget so we just wasted money on felt and plastic parts.
★★★★★
★★★★★
Adam W - October 24, 2018
Verified Purchase
Worked even though slightly broken
Order a pair of these to replace the old ones that fell apart. One of the pair was in a little bit of rough shape, a couple of the tabs that hold it in to the drum had broken off. Ended up working fine anyway, so no big deal.the other glide had no problems. Have a much quieter dryer now.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 26 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Noisy.
Had scape upper felt off of the drum edge but had to use a hacksaw to cut off the three plastic plates that were riveted to the upper felt replacement part. The old part number was131469100.
I watched the video on the repair and followed it. Super easy. Repair only took 30 mins. Please note there are 2 glides. Make sure to order 2.
Eileen from SHERIDAN, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
DRYER MADE A LOT OF NOISE
Took the top dryer cabinet apart to replace all the above parts plus the dryer belt. Because of its age decide to replace all the parts from the above list. Three major problems: none of the video reviews showed this type of dryer. Some parts were practically impossible to get back together. Difficult getting the top square. The top
... Read more of the cabinet picture did not indicate how the top was to be installed. After 23 hours finally got it back together. Then it would not start. Discovered a wire had come loose. The dryer works fine now.
Loud squealing when dryer was turning. At first it was just when it started and eventually it was constant.
Be carful when unpacking, the grounding bearing is in loose with the bolts. I had to chase it. Follow the video instructions for the stacked washer/dryer combo and you will not have a problem. Recommend you have two people working to lift the drum out and to install the new bearing.
Both my husband and I had watched the videos for the parts we ordered. While we had a small space to work in, the repair on our dryer went fine. We are very happy with the parts we ordered along with the short amount of time it took to arrive. Thank you very much for the videos. Purchasing these parts and having the videos really saved u
... Read mores money compared to having to purchase a new dryer.
The repair requires the front panel to be removed. First remove the top by removing two screws in the back of the top panel. Once the top is removed, you have access to all of fasteners for the front panel. I removed the control panel to give myself more room. Simply remove the wire connectors on the panel and two connectors in the up
... Read moreper right of the cabinet. There are four screws that hold the front panel on, two on the inside about a third from the top and two more on the outside at the very bottom. Once the screws are removed, pry the front panel from the machine since there are spring clips holding the panel to the machine. Once the front panel is removed, you have access to the guides and the felts.
Opened top, removed front cover, removed belt, took out drum, replaced bearing on drum and bearing guide on back of dryer. Reinstalled drum and belt, then replaced drum glides and upper felt,let glue set with clamps over night.
My wife was able to easily do the repair before I could get home from work to do it. She watched the PartSelect video on her iPad as she did the necessary steps to get the belt replaced. We only needed one glide replacement, as one was still attached and intact. We should have purchased both sets of felt seal replacements, though that
... Read morewasn't as urgent. My wife thought the repair was quite easy overall.
Drum making thumping noises, clothes getting caught behind drum.
I've always been a "do it yourselfer". If I can fix it, I save money. I took the dryer apart by lifting the top up like car hood. Then I removed the front panel. The front drum glide snapped into place easily where the other one had broken off. The felt strip that you sent was much shorter than the one on the dryer, so once I used the wir
... Read moree wheel to remove the old glue, I cut off the section of the felt that was bad and replaced it with the new felt. The turns much quieter and clothing doesnt get caught behind the drum anymore.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Van
October 12, 2017
Do you have a replacement barring for my dryer tub the one in the back melted
For model number Fex831fs2
Hi Van,
Thank you for your inquiry. The bearing is not sold separately, but with the outer tub, the part number for it is PS418126. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Sarah
April 1, 2023
My yellow drum glide needs replacing is there a part number for that?
For model number GLE0642AS2
Hi Sarah, thank you for reaching out. The drum glide, part number PS5574052, is compatible with your model. We hope this is what you were looking for!