Part Location Diagram of 5303937183 Frigidaire Lower Front Felt Seal with Adhesive
See part 21 in the diagram
Replacing your Frigidaire Dryer Lower Front Felt Seal with Adhesive
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Lower Front Felt Seal with Adhesive 5303937183

★★★★★
★★★★★
8 Reviews

Rated by 15 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 19.83
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS832645
Manufacturer Part Number 5303937183
Manufactured by Frigidaire for Frigidaire, Kenmore, Westinghouse, Crosley
Product Description

Lower Front Felt Seal with Adhesive Specifications

The lower front felt seal with adhesive, also known as a drum felt seal, is used in dyers and allows the drum to easily glide on the front panel. For this repair project, you will need the following tools: #2 Phillips screw driver, #2 square head screw driver, putty knife, and wire bush. If your dryer will not tumble, or makes a squeaking noise when running, replacing this part could solve the problem. Remember to unplug your appliance from the power source for safety before you begin this installation project. Refer to the manual provided by the manufacturer for further installation instructions.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Dryer Lower Front Felt Seal with Adhesive

Replacing your Frigidaire Dryer Lower Front Felt Seal with Adhesive
Troubleshooting
This part fixes the following symptoms:
Noisy | Marks left on clothes
This part works with the following products:
Dryer, Washer Dryer Combo.
Part# 5303937183 replaces these:
AP3220737, 1012549, 134134700
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
4.9
Filter By Rating:
  • 5 Stars
    7
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 2.7 / 5.0, 15 reviews. What's this?
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing installation instruction that matched.
Noisy.
Had scape upper felt off of the drum edge but had to use a hacksaw to cut off the three plastic plates that were riveted to the upper felt replacement part. The old part number was131469100.
Other Parts Used:
Dryer Drum Bearing Bracket Drum Glide - White Drum Belt Lower Front Felt Seal with Adhesive Upper Drum Glide Rear Drum Bearing Kit Drum Support Bearing
  • David from EDGEWOOD, NM
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy dryer
Followed instructions for removal and installation.
Other Parts Used:
Lower Front Felt Seal with Adhesive Front Upper Felt Seal with Adhesive
  • Timothy from OWINGS MILLS, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
DRYER MADE A LOT OF NOISE
Took the top dryer cabinet apart to replace all the above parts plus the dryer belt. Because of its age decide to replace all the parts from the above list.
Three major problems: none of the video reviews showed this type of dryer. Some parts were practically impossible to get back together. Difficult getting the top square. The top of the cabinet picture did not indicate how the top was to be installed.
After 23 hours finally got it back together. Then it would not start. Discovered a wire had come loose. The dryer works fine now.
Other Parts Used:
Dryer Drum Bearing Bracket Drum Glide - White Heater Assembly Lower Front Felt Seal with Adhesive Front Upper Felt Seal with Adhesive Drum Support Bearing
  • Jerry from ROCKWALL, TX
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
High pitched squeal from dryer during use...
Followed directions of another website...had to replace ball and socket joint that attached the drum to the back frame of the dryer...removed top outside metal cover of dryer to facilitate attaching ball/socket kit to the drum...this allowed us to secure the ball/socket kit to the drum without cross threading the screws...with the top of dryer removed this allows you to lift the drum to fit into the plastic bracket...dryer had been in use for over ten years before repair...extreme amount of lint debris throughout internal area of dryer...lint was everywhere...spent a large amount of time vacuuming lint...duct connection from lint trap to lint fan/impeller was very loose and over the years lint seeped out from connection...suggest using duct tape or wood/composite shims to hold the lint duct to the fan/impeller...make sure you remove lint from the back of drum crevice and around the area of the heating element for electric dryers...for sanity's sake this should be a two person job...for this repair we replaced the upper and lower drum felt strip, installed a complete and new ball/socket kit, replaced drum belt, and vacuumed and damp wiped the entire interior of the dryer...
Other Parts Used:
Multi-Rib Drum Belt Lower Front Felt Seal with Adhesive Front Upper Felt Seal with Adhesive
  • Robert from OCEAN SPRINGS, MS
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers, Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer was squealing ( Tennant Complaint)
Followed the video as my unit was exact model( Front Loader) Thank You for your quick ship to me here in Iowa as my repair was made in St. Louis. Parts came with in 2 days then drove to St. Louis with confidence. We purchased this set in 2003 and it is first repair on dryer. This in my rental unit. Thx
Other Parts Used:
Drum Belt Lower Front Felt Seal with Adhesive Rear Drum Bearing Kit
  • John from DES MOINES, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy and clothes getting caught
The repair requires the front panel to be removed. First remove the top by removing two screws in the back of the top panel. Once the top is removed, you have access to all of fasteners for the front panel. I removed the control panel to give myself more room. Simply remove the wire connectors on the panel and two connectors in the upper right of the cabinet. There are four screws that hold the front panel on, two on the inside about a third from the top and two more on the outside at the very bottom. Once the screws are removed, pry the front panel from the machine since there are spring clips holding the panel to the machine. Once the front panel is removed, you have access to the guides and the felts.
Other Parts Used:
Drum Glide - White Lower Front Felt Seal with Adhesive Front Upper Felt Seal with Adhesive
  • John from CHAMPAIGN, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cloths getting caught along drum glide and lint trap and black streaks/sometimes tearing
1) pulled Dryer out from wall and removed top panel
Other Parts Used:
Upper Front Felt Seal Lower Front Felt Seal with Adhesive Drum Glide - White
  • Gabriellle from Vancouver, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
24 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Making a squiking noise and letting lint into the cavity of the dryer
pulled appliance away from wall and unplugged the electrical cord and then used putty knife to pop up the top. Then removed the screws that held the front in place. Disconnected the wire to the switch on the door and then front on a rug and used acetone and scraper to remove the old glue and felt. Cleaned the area thoroughly and apply the glue that come with the kit an give it a couple of seconds to get tacky and then applied the felt and used clothes pins to hold in place for about an hour and then put back together and let it set over night before using. Had good success and it solved my problem.
Other Parts Used:
Lower Front Felt Seal with Adhesive Front Upper Felt Seal with Adhesive
  • Robert from Rice Lake, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum making thumping noises, clothes getting caught behind drum.
I've always been a "do it yourselfer". If I can fix it, I save money. I took the dryer apart by lifting the top up like car hood. Then I removed the front panel. The front drum glide snapped into place easily where the other one had broken off. The felt strip that you sent was much shorter than the one on the dryer, so once I used the wire wheel to remove the old glue, I cut off the section of the felt that was bad and replaced it with the new felt. The turns much quieter and clothing doesnt get caught behind the drum anymore.
Other Parts Used:
Lower Front Felt Seal with Adhesive Drum Glide - White
  • Gerald from Baltimore, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
15 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Black lines and small tears
Previous comments on line were so helpful.

My husband and son took the dryer apart by removing the top in order to get to the drum. Part of silver rim that the Drum Glide is attached to was broken,it had been cut somehow. They had to soder it back in place so they could attach the Drum Glide and so far it's working.
Other Parts Used:
Lower Front Felt Seal with Adhesive Drum Glide - White
  • Robin from Sewaren, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

5 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Candy
February 8, 2018
After replacing felt seals on dryer door, how long does the hi-temp sealant need to set up before putting the dryer door back on. And then how long before dryer can be used again?
PartSelect logo
Hello Candy, thank you for your question. This part should be left to cure for approximately 24 hours before using the appliance. I hope this helps!

9 people found this helpful.

Was this helpful?
Thank you for voting!
Darrell
June 24, 2019
The dryer drum does not rotate as freely as it once did. The dryer still works fine but i have to use a little pressure to turn the drum when it is off. Do i need to replace the dryer felt so that it runs freely again? Thanks! Darrell in north vancouver
For model number GLEQ332CAS1 or GLEQ332S1
PartSelect logo
Hello Darrell, thank you for your question. You can check the drum rollers, belt, felt seals and drum glide to be sure the drum is turning freely inside the unit. If those parts are fine, and you have to give the drum a little push for the motor to get enough power to turn the drum on its own, the motor itself would be the issue. I hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Candy
February 8, 2018
Once the new felt gasket has been replacedhow long does hi-temp sealant need to set up before reinstalling the dryer door
PartSelect logo
Hello Candy, thank you for your question. The seal should be allowed to sit and cure for about 24 hours before using the unit. I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Eric
January 29, 2019
Are part numbers ps832644 and ps832644 identical or interchangeable?
PartSelect logo
Hello Eric, Thank you for the question. The ps832644 and ps832644 is the same part number. Please submit a new question if you have any follow ups. Looking forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Doug
February 11, 2022
What is the difference between upper & lower front felts ? What is the lengths of each one ? (how long are they each) OR can you give me the specs.
For model number GLGR642AS3
PartSelect logo
Hello Doug, Thank you for your inquiry. The upper front felt seal is the shorter section designed to fit at the top edge of the drum support area and is approximately 17 inches long and 1 inch wide. The lower section is the longer section, approximately 47 1/8 inches long by 1 inch wide and is designed to fit the lower edge of the drum support area. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS832645
Manufacturer Part Number: 5303937183
Brand
Model Number
Description
Kenmore
41761712510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41761712511
Washer Dryer Combo - Kenmore 41761712511 Laundry Center
Kenmore
41761722510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41761722511
Washer Dryer Combo - Laundry Center
Kenmore
41761723510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41761723511
Washer Dryer Combo - Laundry Center
Kenmore
41761732810
Washer Dryer Combo - Laundry Center
Kenmore
41761733810
Washer Dryer Combo - Laundry Center
Kenmore
41761733811
Washer Dryer Combo - Kenmore 41761733811 Laundry Center Combo
Kenmore
41764182300
Dryer
Kenmore
41771712510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771712511
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771712512
Washer Dryer Combo - Laundry Center
Kenmore
41771722510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771722511
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771722512
Washer Dryer Combo - Laundry Center
Kenmore
41771723510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771723511
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771723512
Washer Dryer Combo - Laundry Center
Kenmore
41771732810
Washer Dryer Combo - Laundry Center
Kenmore
41771732811
Washer Dryer Combo - Kenmore 41771732811 Laundry Center Combo
Kenmore
41771733810
Washer Dryer Combo - Laundry Center
Kenmore
41771733811
Washer Dryer Combo - Laundry Center
Kenmore
41774182300
Dryer
Kenmore
41774182301
Dryer
Kenmore
41780412700
Dryer
Kenmore
41782042102
Dryer
Kenmore
41782052102
Dryer
Kenmore
41782052103
Dryer
Kenmore
41782142102
Dryer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service